Cut-to-Length / Multi-Blanking Lines

admin ÓRDENES RECIENTES E INSTALACIONES Leave a Comment

[ORDER]

SPANISH TESTING RED BUD INDUSTRIES RECEIVES MULTI-BLANKING LINE ORDER FROM AAON INCORPORATED

Red Bud Industries recently received an order for a Precision Multi-Blanking Line from Aaon Incorporated, a heating and cooling equipment manufacturer located in Tulsa, Oklahoma. Featured in the line will be Red Bud Industries Servo Roll Feed and CNC Programmable Slitter. The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly downtime that can occur when using conventional Packed Arbor Slitters. An additional advantage to the system will be the Automatic Strip Divider.

more..

[ORDER]

RED BUD INDUSTRIES RECEIVES PRECISION BLANKING LINE ORDER FROM CONKLIN METAL INDUSTRIES

Red Bud Industries has received an order for a Precision Blanking Line from Conklin Metal Industries, a steel service center and distributor of HVAC and duct fabrication supplies located in Atlanta, Georgia. The new line will be capable of cutting and blanking material up to 0.078″ (2 mm) by 60″ (1550 mm) at coil weights up to 50,000 lbs. (22,680 kg). The line will also have beading and coil breakdown capabilities. The line will consist of a Coil Stage &.

more..

[ORDER]

RED BUD INDUSTRIES RECEIVES MULTI-BLANKING LINE ORDER FROM PACIFIC METAL

Red Bud Industries recently received an order for a Precision Multi-Blanking Line from Pacific Metal, a steel service center located in Tualatin, Oregon. Featured in the line will be Red Bud Industries Precision Grip Feed System and CNC Programmable Slitter. This combination of machines will give Pacific Metal the capability of producing blanks with width and length tolerances of ± .005″ (.127 mm). The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly.

more..

[INSTALLATION]

RED BUD INDUSTRIES SHIPS HEAVY GAGE CUT-TO-LENGTH LINE TO PACIFIC STEEL & RECYCLING

 

Red Bud Industries recently shipped a .500” (12.7 mm) x 96” (2438 mm) Heavy Gage Cut-To-Length Line with Stretcher Leveler to Pacific Steel & Recycling’s Syracuse, Utah, location. Red Bud Industries is located in Red Bud, Illinois USA. The line includes a 50’ (15 M) Stretcher Leveler with “SUREGRIP®” technology that allows HRP&O and other hard to grip material to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be used for.

more..

[INSTALLATION]

RED BUD INDUSTRIES SHIPS PRECISION BLANKING LINE TO MAJESTIC STEEL USA, INC.

Red Bud Industries recently shipped a Precision Blanking Line to Majestic Steel USA, Inc., a steel service center located in Cleveland, Ohio. The new line is capable of cutting and blanking material up to 0.075” (1.91 mm) by 72” (1830 mm) at coil weights up to 50,000 lb (22,680 kg). It consists of an Uncoiler, Thread System, Grip Feed, Shear, Drop Stacker, Automatic Lowering Stack table, and End Discharge Rollouts.

more..

[INSTALLATION]

RED BUD INDUSTRIES SHIPS PRECISION BLANKING LINE TO MISHAWAKA SHEET METAL, INC.

 

Red Bud Industries shipped a Precision Blanking Line to Mishawaka Sheet Metal, Inc. located in Elkhart, Indiana. The new line is capable of cutting and blanking material up to 0.090” by 72” at coil weights up to 30,000 lb. It consists of a Coil Stage & Load System, Uncoiler, Peeler Breaker, Straightener, Thread System, Grip Feed, Shear, Drop Stacker, Automatic Lowering Stack table, and End Discharge Rollouts.

more..

[INSTALLATION]

RED BUD INDUSTRIES INSTALLS MULTI-BLANKING LINE AT MAGIC COIL PRODUCTS LLC

Red Bud Industries installed a Precision Multi-Blanking Line at Magic Coil Products LLC, Butler, Indiana. Red Bud Industries is located in Red Bud, Illinois U.S.A. Featured in the line is Red Bud Industries’ Precision Grip Feed System and CNC Programmable Slitter. This combination of machines will give Magic Coil the capability of producing blanks with width and length tolerances of ±.005″. The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly down time.

more..

[INSTALLATION]

PROMINOX INSTALLS RED BUD PRECISION BLANKING LINE

Prominox S.A. de C.V. of Mexico City, DF, Mexico, a service center group specializing in stainless steel and aluminum products, installed a Red Bud Industries’ Precision Blanking Line in their facility in San Luis Potosi, SLP, Mexico. The new line is capable of processing stainless steel material up to .250” (6 mm). The new line features Red Bud’s Precision Heavy Gage Grip Feed System. The Grip Feed System gives Prominox the capability of producing blanks with length tolerances of ±.005.

more..

[ORDER]

CAMDEN YARD STEEL PURCHASES RED BUD HALF-LINE CUT-TO-LENGTH RETROFIT

 

Camden Yard Steel, located in Camden, New Jersey, has ordered a Half-Line Cut-To-Length Line Retrofit from Red Bud Industries. The retrofit will include Red Bud’s Precision Dual Motor Grip Feed System. The Grip Feed System will give Camden Yard the capability of producing blanks with length tolerances of ±.005” (.127 mm). The retrofit will consist of a Dual Motor Grip Feed, Shear, Drop Stacker with Reject Capabilities, Automatically Lowering Stack Table, Side Discharge Rollouts, and 90 Degree Transfer Conveyor.

more..

[INSTALLATION]

FERALLOY CORPORATION INSTALLS RED BUD MULTI-BLANKING LINE

 

Feralloy Corporation of Chicago, Illinois, installed a Red Bud Industries’ High Speed Multi-Blanking Line at their facility in Decatur, Alabama. The new line is capable of processing material up to .135” at 72” wide and features Red Bud’s Precision Grip Feed System and CNC Programmable Slitter as well as their Automatic Strip Divider Positioning System. Also featured in the line is a Fully Automatic 5 Hi-Cartridge Leveler.

more..

[INSTALLATION]

RYERSON INSTALLS RED BUD MULTI-BLANKING LINE

 

Ryerson Inc., installed a .250″ by 72” wide Multi-Cut Blanking Line in their Charlotte, N.C. facility from Red Bud Industries of Red Bud, Illinois. Featured in the line will be Red Bud’s Precision Grip Feed System and CNC Programmable Slitter. This combination of machines will give Ryerson the capability of producing blanks with width and length tolerances of ± .005” (127 mm). The system also includes an Automatic Strip Divider Positioning System. While the operator is setting up the Slitting.

more..

[INSTALLATION]

VIKING MATERIALS INSTALLS SECOND RED BUD BLANKING LINE

Viking Materials of Minneapolis, Minnesota, a wholly owned subsidiary of Reliance Steel and Aluminum Co., installed their second Red Bud Industries Precision Blanking Line. The line is capable of processing stainless steel up to .250” (6 mm), as well as aluminum and carbon steel up to .312” (8 mm) thick with coil weights up to 50,000 lb (22,680 kg). The new line features Red Bud’s Precision Heavy Gage Grip Feed System. The Grip Feed System gives Viking the capability of

more..

[INSTALLATION]

ALUTODO SA DE CV INSTALLS RED BUD MULTI-BLANKING LINE

Alutodo SA de CV, a subsidiary of Grupo CUPRUM located in San Nicolás de los Garza, NL, Mexico, installed a Red Bud Industries Precision Multi-Blanking Line. The new line is capable of processing material up to .250” (6 mm) at 60” (1524 mm) wide. Featured in the line are Red Bud’s Precision Grip Feed System and CNC Programmable Slitter. This combination of machines gives Alutodo the capability of producing blanks with width and length tolerances of ±.005″ (.127 mm)..

more..

[INSTALLATION]

INSTALLATION AT JANCO STEEL LIMITED

 

Janco Steel Limited, Stoney Creek, Ontario, Canada, has undergone a major expansion of their service center including expansion of their processing capabilities. As a part of this expansion, they installed a Red Bud Industries .25” x 72” x 80,000 lb combination Stretcher Leveler/Multi-Blanking Line. The new line can multi-blank material up to .188” (4.7 mm) thick and cut-to-length, edge trim, and stretcher level material up to .250” (6.35 mm)..

more..

[INSTALLATION]

STEEL TECHNOLOGIES DE MEXICO INSTALLS SECOND RED BUD LINE

 

Steel Technologies de Mexico of Guadalupe, NL, Mexico, installed a Red Bud Industries Precision Multi-Blanking Line in their facility in Cuidad Juarez, Chi, Mexico. This line joins a Red Bud Industries High Speed Slitting Line installed there in 2007. The new line is capable of processing mild steel up to .135″ (3.4 mm) or stainless up to .105″ (2.7 mm) as presently configured. Featured in the line are Red Bud’s Precision Grip Feed System and CNC Programmable Slitter.

more..

[INSTALLATION]

MIDWAY METALS OF YATALA INSTALLS NEW RED BUD BLANKING LINE

 

Midway Metals of Yatala, Queensland, Australia installed a 10 mm (.393″) Precision Blanking Line with Stretcher Leveler at its new greenfield site in Yatala, Queensland, to allow the service center to address the laser cutter and fabrication markets. The new line was designed and built to process stainless steel at widths up to 2000 mm (79″) with coil weights up to 24,000 kg (53,000 lb) at part lengths up to 9000 mm (355″).

more..

[INSTALLATION]

KEN-MAC METALS INSTALLS RED BUD PRECISION MULTI-BLANKING LINE

 

Ken-Mac Metals, a division of ThyssenKrupp Materials NA, installed a Red Bud Industries Precision Multi-Blanking Line at their Kansas City, Missouri, service center. The line will be used to process stainless steel, aluminum, and prepainted materials. Featured in the line are Red Bud’s Precision Grip Feed System and CNC Programmable Slitter. This combination of machines gives Ken-Mac Metals the capability of producing blanks with width and length tolerances of ±.005” (.127 mm). The CNC Slitter can be set up in.

more..

[INSTALLATION]

NEW RED BUD MULTI-CUT BLANKING LINE INSTALLED BY PACKER YADPAZ PROFILES LTD

 

Packer Yadpaz Profiles Ltd of Kiryat Malachi, Israel, has installed a Red Bud Industries Multi-Cut Blanking Line with Stretcher Leveler. The new line allows Packer to provide its customers with exceptionally flat, stress relieved material with length and width tolerances that are the best in the industry. A Red Bud Stretcher Leveler will produce the flattest most stable material possible virtually independent of incoming strip shape and severity. The operator simply stretches the material until it is flat..

more..

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *