RED BUD INDUSTRIES RECEIVES SLITTING LINE ORDER FROM LAPHAM HICKEY STEEL CORPORATION
Red Bud Industries recently received an order for a High Speed Slitting Line for Lapham Hickey Steel Corporation. Lapham-Hickey Steel is a 4th generation family owned and operated full-line carbon service center that was founded in 1926 and is headquartered in Bedford Park, IL. With 11 total locations throughout the Midwest, East Coast and Southeast, Lapham-Hickey is an industry-leading supplier of slit coil, sheet, plate, bars, tubing and fabricated products. The new 60” (1525 mm) by 60,000 lbs (27,000 kg).
RED BUD INDUSTRIES SHIPS SLITTING LINE TO NATIONAL MATERIAL OF MEXICO
Red Bud Industries, located in Red Bud, Illinois USA, recently shipped and installed an Advanced High Strength Steel High Speed Slitting Line to National Material of Mexico (NMM), a subsidiary of National Material L.P., located in Monterrey, Mexico. The new .250” (6mm) x 72” (1830mm) line, which was operational in November 2017, is capable of processing AHSS Automotive Steel and other surface critical material with tensile strengths up to 250,000 psi (1725 MPa). The line incorporates Red Bud Industries’ “precision.
PETERSEN ALUMINUM CORPORATION ORDERS RED BUD INDUSTRIES’ LIGHT GAGE SLITTING LINE
Red Bud Industries has received an order for a Light Gage Slitting Line from Petersen Aluminum Corp., manufacturer of PAC-CLAD metal roof and wall products located in Elk Grove Village, Illinois. This line will be the sixth Light Gage Slitting Line that Petersen has ordered from Red Bud Industries. Petersen also operates three Red Bud Industries’ Blanking Lines. The new Light Gage Slitting Line will provide Petersen Aluminum with a low cost, low passline, small footprint Slitting Line that eliminates.
RED BUD INDUSTRIES RECEIVES SLITTING LINE ORDER FROM NATIONAL MATERIAL OF MEXICO
Red Bud Industries, located in Red Bud, Illinois USA, recently received an order for an Advanced High Strength Steel High Speed Slitting Line from National Material of Mexico (NMM), a subsidiary of National Material L.P., located in Apodaca, Mexico. The new .250″ (6mm) x 72″ (1830mm) line is capable of processing AHSS Automotive Steel and other surface critical material with tensile strengths up to 250,000 psi (1725 MPa). The line will incorporate Red Bud Industries’ “precision large arbor technology” which.
RED BUD INDUSTRIES RECEIVES ORDER FOR THREE LIGHT GAGE SLITTING LINES FROM PETERSEN ALUMINUM CORPORATION
Red Bud Industries has received an order for three Light Gage Slitting Lines from Petersen Aluminum Corporation, a supplier of metal architectural products located in Elk Grove Village, Illinois. This will be Petersen’s third, fourth, and fifth Slitting Line and their eighth overall line purchase from Red Bud Industries. The new machines will provide Petersen Aluminum with three low cost, low passline, small footprint Slitting Lines that eliminate the need for costly foundation work. Petersen Aluminum’s new equipment will consist.
RED BUD INDUSTRIES RECEIVES MULTI-BLANKING LINE ORDER FROM PACIFIC METAL
Red Bud Industries recently received an order for a Precision Multi-Blanking Line from Pacific Metal, a steel service center located in Tualatin, Oregon. Featured in the line will be Red Bud Industries Precision Grip Feed System and CNC Programmable Slitter. This combination of machines will give Pacific Metal the capability of producing blanks with width and length tolerances of ± .005″ (.127 mm). The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly.
MIDWAY METALS OF YATALA INSTALLS NEW RED BUD SLITTING LINE
Midway Metals of Yatala, Queensland, Australia installed an 8 mm (.315”) Red Bud Slitting Line at its new site in Yatala, Queensland. The new Slitting Line joins a Red Bud Precision Blanking Line with Stretcher Leveler already in operation at the site. The new line was designed and built to process stainless steel, cold roll, and galvanized material at widths up to 2134 mm (84”) with coil weights up to 13,600 kg (30,000 lb).
RUDOLF FLENDER ROHR GMBH INSTALLS RED BUD INDUSTRIES HIGH SPEED SLITTING LINE
Rudolf Flender Rohr GmbH of Siegen, Germany, has completed installation of a new Red Bud Industries Precision Slitting Line. The new Slitting Line will play an integral role in the production of welded steel pipes at Flender and is part of a major upgrade to their manufacturing facility. The new Red Bud Line is capable of slitting material up to 8 mm (.315”) thick and production speeds up to 610 m/min (2000 FPM). The line can handle incoming coil weights.
RED BUD INDUSTRIES AWARDED 1/2″ STRETCHER LEVELING LINE BY MCNEILUS STEEL, INC.
In 2002, McNeilus Steel, Inc. of Dodge Center, Minnesota, was looking for ways to improve the quality of their existing Coil Processing Lines. They looked at several alternatives, including a Temper Mill, to improve their quality and efficiency. After an extensive study, they decided to purchase a Precision Multi-Blanking Line from Red Bud Industries of Red Bud, Illinois. The new line included Red Bud’s Heavy Gage Stretcher Leveler which Red Bud claimed would provide better quality finished material more competitively.