Stretcher Leveling Lines (German)

admin Orders & Installations Leave a Comment

[ORDER]

RED BUD INDUSTRIES RECEIVES HEAVY GAGE CUT-TO-LENGTH ORDER FROM STEEL WAREHOUSE COMPANY

Red Bud Industries recently received an order for a 0.530” (13 mm) x 76” (2000 mm) Heavy Gage Cut-To-Length Line with Stretcher Leveler from Steel Warehouse Company, a steel service center headquartered in South Bend, Indiana. The new line will be installed at Steel Warehouse beginning in November this year at the Company’s facility in Osceola, Arkansas. The new line will feature Red Bud Industries’ T2 series Stretcher Leveler with a 40’ (12 m) stretch bed. In addition, this unit.

more..

[ORDER]

RED BUD INDUSTRIES RECEIVES HEAVY GAGE CUT-TO-LENGTH LINE ORDER FROM RATNER STEEL

Red Bud Industries recently received an order for a 0.625″ (16 mm) x 76″ (2000 mm) Heavy Gage Cut-To-Length Line with Stretcher Leveler from Ratner Steel, a steel service center headquartered in Roseville, Minnesota. It is the fourth Stretcher Leveler purchased from Red Bud Industries. The new line will be installed at Ratner Steel’s new facility in Osceola, Arkansas. The new line will feature Red Bud Industries’ T2 series Stretcher Leveler with a 40′ (12 m) stretch bed. In addition.

more..

[ORDER]

RED BUD INDUSTRIES RECEIVES STRETCHER LEVELER RETROFIT ORDER FROM ALLIED STEELRODE PTY LTD

Red Bud Industries, located in Red Bud, Illinois USA, recently received an order for a 13 mm x 2130 mm Stretcher Leveler Retrofit from Allied Steelrode PTY LTD, a steel service center, located in Randhart, South Africa. The new Stretcher will complement a complete Red Bud Line with a Stretcher Leveler that was installed in 2015 at their Meyerton facility. A Red Bud Stretcher Leveler can produce the flattest, most stable material possible while operating virtually independent of incoming strip.

more..

[INSTALLATION]

RED BUD INDUSTRIES SHIPS HEAVY GAGE CUT-TO-LENGTH LINE TO PACIFIC STEEL & RECYCLING

 

Red Bud Industries recently shipped a .500” (12.7 mm) x 96” (2438 mm) Heavy Gage Cut-To-Length Line with Stretcher Leveler to Pacific Steel & Recycling’s Syracuse, Utah, location. Red Bud Industries is located in Red Bud, Illinois USA. The line includes a 50’ (15 M) Stretcher Leveler with “SUREGRIP®” technology that allows HRP&O and other hard to grip material to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be used for.

more..

[INSTALLATION]

RED BUD INDUSTRIES SHIPS BLANKING LINE TO ALLIANCE STEEL CORPORATION

Red Bud Industries recently shipped a .375” ( 9.5 mm) x 72” (1830 mm) Blanking Line with Stretcher Leveling to Alliance Steel Corporation, a steel service center located in Bedford Park, Illinois. The Stretcher Leveler includes “SUREGRIP®” technology that allows all material such as HR, Pickled & Oiled or even Coated products such as Galvanized and other hard to grip materials to be run without slippage or having to change the gripper pads. The non-slip metallic grippers can also be .

more..

[INSTALLATION]

PAXTON & VIERLING STEEL COMPANY

Red Bud Industries celebrated a landmark earlier this year by processing the first 1.00″ (25.4 mm) thick coil on a Red Bud Line. The line is installed at Paxton & Veirling Steel Company at its Omaha, Nebraska, facility. Not only is this the biggest Cut-To-Length Line ever built by Red Bud Industries, it is also one of the largest in the world. The line includes a 3000 ton (2678 metric ton ) Stretcher Leveler featuring our SUREGRIP® system. This technology.

more..

[INSTALLATION]

FERROUSOUTH INSTALLS RED BUD STRETCHER LEVELER RETROFIT

FerrouSouth, located in Iuka, Mississippi, installed a Red Bud Industries’ .250” (6 mm) x 72” (1830 mm) Stretcher Leveler with SUREGRIP® technology in an existing Cut-To-Length Line. This was FerrouSouth’s second Stretcher installation at this facility. Because this particular line primarily runs lighter gage material, maintaining high throughput was an important factor in the selection process. The Red Bud Stretcher was selected due to its quick cycle time. In addition, its specially designed grippers also eliminated the need to use/change.

more..

[INSTALLATION]

RUSSEL METALS INSTALLS RED BUD STRETCHER LEVELER RETROFIT

Russel Metals, located in Mississauga, Ontario, Canada, installed a Red Bud Industries’ .250” (6 mm) x 72” (1830 mm) Stretcher Leveler with SUREGRIP® technology in an existing Cut-To-Length Line at their B&T Steel Division in Stoney Creek, Ontario. The Stretcher Leveler and its accompanying components were part of a major upgrade of capabilities at the Stoney Creek facility. The new Stretcher Leveler produces the flattest, most stable material possible while operating virtually independent of incoming strip shape and severity.

more..

[INSTALLATION]

MCNEILUS STEEL INSTALLS FOURTH RED BUD STRETCHER LEVELING LINE

McNeilus Steel installed a .500” (12.7 mm) Cut-To-Length Line with a Stretcher Leveler with SUREGRIP® technology from Red Bud Industries at their Fond Du Lac, Wisconsin, facility. This is the fourth Stretcher Leveling Line that McNeilus has installed from Red Bud Industries. It joins the two lines at their Dodge Center, Minnesota, facility and the line at their Fargo, North Dakota, service center. The new line features a number of new innovations that increase line speed and throughput. The system.

more..

[ORDER]

ALLIED STEELRODE ORDERS RED BUD HEAVY GAGE CUT-TO-LENGTH LINE

 

Allied Steelrode Pty Ltd of Randhart, South Africa, purchased a Red Bud Industries’ Heavy Gage Cut-To-Length Line with SUREGRIP® Stretcher Leveler. The Line will be capable of processing material up to .473” (12 mm) thick at material widths up to 87” (2200 mm) wide at coil weights up to 73,000 lb. (33,113 kg). The new Cut-To-Length Line was purchased by Allied Steelrode as part of their commitment to their customers to provide the best possible end product available in terms.

more..

[INSTALLATION]

RATNER STEEL INSTALLS THIRD RED BUD STRETCHER LEVELER

 

Ratner Steel of Roseville, Minnesota, installed a 77” wide by .500” Cut-To-Length Line with a “SUREGRIP®” Adjustable Stretcher Leveler from Red Bud Industries. The new line can handle coils up to 80,000 lb. and also features a 48’ Stacker with dual 60,000 lb. Stack Tables. The new hybrid line runs in both start/stop and looping modes. Thicker material is run in start/stop mode while 5/16” and lighter material runs in a loop. The loop allows up to 80% higher productivity.

more..

[INSTALLATION]

JDM STEEL SERVICE INSTALLS RED BUD .500” STRETCHER LEVELER

 

JDM JDM Steel Service of Chicago Heights, Illinois, installed a Red Bud Industries’ .500” x 72” Stretcher Leveler. The Stretcher was installed in an existing line as part of a major upgrade of JDM’s processing capabilities. The Stretcher Leveler will process material up to .500” (13 mm) at 72” (1830 mm) wide. Due to trapped internal stresses, once material is cut, it can spring back. Stretcher leveling exceeds the yield in all of the material top to bottom and side to.

more..

[INSTALLATION]

ALUTODO SA DE CV INSTALLS RED BUD MULTI-BLANKING LINE

Alutodo SA de CV, a subsidiary of Grupo CUPRUM located in San Nicolás de los Garza, NL, Mexico, installed a Red Bud Industries Precision Multi-Blanking Line. The new line is capable of processing material up to .250” (6 mm) at 60” (1524 mm) wide. Featured in the line are Red Bud’s Precision Grip Feed System and CNC Programmable Slitter. This combination of machines gives Alutodo the capability of producing blanks with width and length tolerances of ±.005″ (.127 mm).

more..

[INSTALLATION]

MCNEILUS STEEL INSTALLS THIRD RED BUD STRETCHER LEVELING LINE

Red Bud Industries installed a .500″ (12.7 mm) Cut-To-Length Line with a Stretcher Leveler at McNeilus Steel’s new Fargo, North Dakota, facility. This is the third Stretcher Leveling Line that McNeilus has purchased from Red Bud Industries. It joins the two lines already in production at their Dodge Center, Minnesota, facility. A Red Bud Stretcher Leveler can produce the flattest most stable material possible virtually independent of incoming strip shape and severity.

more..

[INSTALLATION]

INSTALLATION AT JANCO STEEL LIMITED

 

Janco Steel Limited, Stoney Creek, Ontario, Canada, has undergone a major expansion of their service center including expansion of their processing capabilities. As a part of this expansion, they installed a Red Bud Industries .25” x 72” x 80,000 lb combination Stretcher Leveler/Multi-Blanking Line. The new line can multi-blank material up to .188” (4.7 mm) thick and cut-to-length, edge trim, and stretcher level material up to .250” (6.35 mm). Featured in the line is Red Bud’s new Fully Automatic CNC.

more..

[INSTALLATION]

MSCSA-MACSTEEL SERVICE CENTERS OF SOUTH AFRICA INSTALLS RED BUD STRETCHER LEVELER

 

MSCSA of Wadeville, South Africa, installed a Red Bud Industries Sure Grip Stretcher Leveler. The Stretcher Leveler was added as part of Macsteel’s commitment to be the leader in the South African market for supply of stress relieved panel flat material to the laser industry. The Stretcher Leveler was installed as part of a half line retrofit of an existing Cut-To-Length Line. The Stretcher Leveler will process material up to 13 mm (.500”) at widths up to 2134 mm (84”).

more..

[INSTALLATION]

NEW RED BUD MULTI-CUT BLANKING LINE INSTALLED BY PACKER YADPAZ PROFILES LTD

 

Packer Yadpaz Profiles Ltd of Kiryat Malachi, Israel, has installed a Red Bud Industries Multi-Cut Blanking Line with Stretcher Leveler. The new line allows Packer to provide its customers with exceptionally flat, stress relieved material with length and width tolerances that are the best in the industry. A Red Bud Stretcher Leveler will produce the flattest most stable material possible virtually independent of incoming strip shape and severity. The operator simply stretches the material until it is flat.

more..

[INSTALLATION]

OLYMPIC STEEL INSTALLS NEW RED BUD BLANKING LINE

 

Red Bud Industries installed a .375″ (9.52 mm) Blanking Line with a Stretcher Leveler at Olympic Steel’s Plymouth, Minnesota, facility. Olympic decided to add the Heavy Gage Line in order to meet their customers’ demands for laser quality, low stress, and heavy gage material. A Red Bud Stretcher Leveler can produce the flattest, most stable material possible while operating virtually independent of incoming strip shape and severity. The operator simply stretches the material until it is flat.

more..

[INSTALLATION]

JDM STEEL SERVICE, INC. INSTALLS SCS LINE

 

Red Bud Industries has completed the installation of a new SCS Coil Line at JDM Steel Service, Inc. in Chicago Heights, Illinois. It’s the second SCS Coil Line installed in the United States. A SCS Coil Line brings proven SCS cost, quality, and environmental advantages to mills, intermediary processors (picklers and tubers), service centers, and toll processors. This process leaves material with a smooth, clean, rust resistant, and paintable surface. In addition to SCS, the line has proven to have.

more..

[INSTALLATION]

RED BUD INDUSTRIES AWARDED 1/2″ STRETCHER LEVELING LINE BY MCNEILUS STEEL, INC.

 

In 2002, McNeilus Steel, Inc. of Dodge Center, Minnesota, was looking for ways to improve the quality of their existing Coil Processing Lines. They looked at several alternatives, including a Temper Mill, to improve their quality and efficiency. After an extensive study, they decided to purchase a Precision Multi-Blanking Line from Red Bud Industries of Red Bud, Illinois. The new line included Red Bud’s Heavy Gage Stretcher Leveler which Red Bud claimed would provide better quality finished material more competitively.

more..

Leave a Reply

Your email address will not be published. Required fields are marked *