Red Bud Industries Installs Multi-Blanking Line at Magic Coil Products LLC

Image

Red Bud Industries installed a Precision Multi-Blanking Line at Magic Coil Products LLC, Butler, Indiana. Red Bud Industries is located in Red Bud, Illinois USA.

Featured in the line is Red Bud Industries’ Precision Grip Feed System and CNC Programmable Slitter. This combination of machines will give Magic Coil the capability of producing blanks with width and length tolerances of ±.005″. The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly down time that can occur when using conventional Packed Arbor Slitters. An additional advantage to the system will be the Automatic Strip Divider Positioning. While the operator is setting up the Slitting Head, the Strip Divider Positioning System will automatically set up the dividers in the Strip Stacker. When the operator has finished setting up the Slitting Head, the Strip Stacker will be ready to run blanks.

The new line is capable of processing coils up to 50,000 lbs. (23,000 kg) at widths up to 72″ (1830 mm) and thicknesses up to .140″ (3.56 mm). The new line consists of a Coil Lift, Uncoiler, Peeler Breaker, Crop Shear, 5 Hi Precision Leveler, “Pop Up” Flatness Inspection Table, “Hands Free” Thread System, Dual Motor Grip Feed, CNC Programmable Slitter, Scrap Winders, Shear, Combination Drop/Strip Stacker, Part Diverter, Automatically Lowering Stack Table, and End Discharge Rollouts.